...
...
...
...
Contents
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Description
A chain of approval represents a series of document approvals that must happen in a specific sequence. ln other words, it describes the procedure the documents must pass through before they are approved for further processing.
...
Right-click the module name and select New Chain in the menu. The following dialog appears:
In the Chain dialog, enter the name of a new chain.
Click SAVE to proceed.
...
Under theselected module, right-click the newly created chain and select New Approver in the menu. This opens the Approver dialog:
From the Position drop-down, select the position you want to assign to the chain. Besides, you can provide an approver with the possibility to modify documents by selecting the Can modify document if approver/coordinator option.
Click SAVE to proceed.
...
Under the selected module, right-click the added approver position and select Add Below > New Coordinator from the menu. This opens the Member dialog:
From the Position drop-down list, select the position you want to assign. On selecting, you can enable the options below:
Is Passive makes a position unavailable in the list of subordinates? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Is Coordinator set the coordinator level in the chain of approval? Selecting the option enables the Can modify document if approver/coordinator option.
Subordinate creating and submitting the document gives a subordinate the permission to create and submit time registrations.
Is the Time clock only user specifying that a subordinate use the Time clock for time registrations?
Can modify document if approver/coordinator (active only if the Is Coordinator option is enabled) provides a coordinator with the permission to modify time registrations. Besides, you can specify the documents to be modified by selecting Hours registrations.
Click SAVE to proceed.
...
Under the selected module, right-click the added coordinator and select Add Below > New Subordinate from the menu. This opens the Member dialog:
From the Position drop-down list, select the position you want to assign. On selecting, you can enable the options below:
Is Passive makes a position unavailable in the list of subordinates? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Is Coordinator set the coordinator level in the chain of approval? Selecting the option enables the Can modify document if approver/coordinator option.
Subordinate creating and submitting the document gives a subordinate the permission to create and submit time registrations.
Is the Time clock only user specifying that a subordinate use the Time clock for time registrations?
Can modify document if approver/coordinator (active only if the Is Coordinator option is enabled) provides a coordinator with the permission to modify time registrations.
Click SAVE to proceed.
...
Right-click the created chain and select Add below > New Multiple Level from the menu. This opens the Member dialog:
Define the name of the approver multiple levels being created (the Multiple Level name is set by default). When done, you can enable the options below:
Is Passive makes the level unavailable in the list? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Can not approve own Timesheets forbids an approver to approve own timesheets.
Can modify document if approver/coordinator provides an approver with the permission to modify time registrations.
Click SAVE to proceed.
...
Right-click the created approver multiple levels and select Add below > New Multiple Level from the menu. This opens the Member dialog:
Define the name of the coordinator at multiple levels being created (the Multiple Level name is set by default). When done, you can enable the options below:
Is Passive makes the level unavailable in the list? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Can not approve own Timesheets forbids an approver to approve own timesheets.
Can modify document if approver/coordinator provides a coordinator with the permission to modify time registrations.
Click SAVE to proceed.
...
Right-click the created coordinator multiple levels and select New Coordinator. This opens the Member dialog:
From the Position drop-down list, select the position you want to assign.
Click SAVE to proceed.
...
Right-click the created coordinator multiple levels and select Add below > New Multiple Level from the menu. This opens the Member dialog:
Define the name of the subordinate multiple levels being created (the Multiple Level name is set by default). When done, you can enable the options below:
Is Passive makes the level unavailable in the list? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Subordinate creating and submitting the document gives a subordinate the permission to create and submit time registrations.
Is the Time clock only user specifying that a subordinate use the Time clock for time registrations?
Click SAVE to proceed.
...
Right-click the created subordinate multiple levels and select New Coordinator. This opens the Member dialog:
From the Position drop-down list, select the position you want to assign.
Click SAVE to proceed.
...
Right-click the module name and select New Chain in the menu. The following dialog appears:
In the Chain dialog, enter the name of a new chain.
Click SAVE to proceed.
...
Under theselected module, right-click the newly created chain and select New Approver in the menu. This opens the Approver dialog:
Select whether you want to assign a position or a certain name to an approver. To do this, select one of the members by options:
Rank/Office. Select the option to assign an approver position:
Pin/Name. Select the option to assign a certain approver name:
When done, you can enable the options below:
Is Passive makes the approver level unavailable in the list? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Can modify document if approver/coordinator provides an approver with the permission to modify time registrations.
Click SAVE to proceed.
...
Right-click the newly created approver chain and select Add below > New Coordinator in the menu. This opens the Member dialog:
Select whether you want to assign a position or a certain name of a coordinator. To do this, select one of the members by options:
Rank/Office. Select the option to assign a coordinator position:
Pin/Name. Select the option to assign a certain coordinator name:
When done, you can enable the options below:
Is Passive makes a position unavailable in the list of subordinates? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Is Coordinator set the coordinator level in the chain of approval?
Can modify document if approver/coordinator (active only if the Is Coordinator option is enabled) provides a coordinator with the permission to modify time registrations.
Click SAVE to proceed.
...
Right-click the added coordinator and select Add Below > New Subordinate from the menu. This opens the Member dialog:
Select whether you want to assign a position or a certain name to a subordinator. To do this, select one of the members by options:
Rank/Office. Select the option to assign a subordinator position:
Pin/Name. Select the option to assign a certain subordinator name:
When done, you can enable the options below:
Is Passive makes a position unavailable in the list of subordinates? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Subordinate creating and submitting the document sets the subordinate level in the chain of approval.
Click SAVE to proceed.
...
Right-click the module name and select New Chain in the menu. The following dialog appears:
Enable Multiple Level option.
With the multiple level option selected, you will have the possibility to link travel expense reports towards vessels. Furthermore, this gives you the possibility to customize the approval process so that certain approvers have access to approve only travel expense reports belonging to certain vessels.
Employees current or last onboard activity during the creation of the document
This option links the travel expense report to the vessel that is registerred towards the employees current onboard activity, or their last onboard activity.Documents (Vessel link)
This option links the document to the vessel that the employee selects in the Vessel dropdown menu when they register they travel expense report.
We recommend to use the Documents (Vessel link) option. This allows the employees themselves to select which vessel the travel expense report belongs to. Using the Onboard Activity option may in certain situations when a crew member is moving between two vessels result in the expense report being linked towards the incorrect vessel.
Within the dialog, enter the chain name and select the Multiple Level option.
Click SAVE to proceed.
...
Right-click the created chain and select New Multiple Level from the menu. This opens the Member dialog:
Define the name of the approver multiple levels being created (the Multiple Level name is set by default).
Select the search criteria of crew members for the current multiple levels: Rank/Office, Pin/Name, Position/Vessel.
Proceed with the following options:
Is Passive makes the level unavailable in the list? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Can modify document if approver/coordinator provides an approver or a coordinator with the permission to modify time registrations.
Can not approve own Travel Expenses forbids to approve own travel expense documents.
Activity per document dates (available only if Level by is set to Position/Vessel) allows using the document date for searching crew members. APP will search for crew members' historical activities within the dates defined in the document.
Click SAVE to proceed.
...
Right-click the created multiple levels and select New Approver in the menu. This opens the Approver dialog:
Within the dialog, specify the following fields:
Vessel. From the drop-down list, select the vessel to which you want to assign a crew member.
Position. From the drop-down list, select the position of a crew member to be assigned.
Click SAVE to proceed.
...
Right-click the created approver multiple levels and select Add below > New Coordinator from the menu. This opens the Member dialog:
Select whether you want to define a position or a certain name of a coordinator. To do this, select one of the members by options:
Rank/Office. Select the option to assign a coordinator position:
Pin/Name. Select the option to assign a certain subordinator name:
When done, you can enable the options below:
Is Passive makes a position unavailable in the list of subordinates? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Is Coordinator set the coordinator on iple levels?
Can modify document if approver/coordinator (active only if the Is Coordinator option is enabled) provides a coordinator with the permission to modify time registrations.
Click SAVE to proceed.
...
Right-click the created coordinator level and select Add below > New Subordinate from the menu. This opens the Member dialog:
Select whether you want to define a position or a certain name of a subordinate. To do this, select one of the members by options:
Rank/Office. Select the option to assign a subordinate position:
Pin/Name. Select the option to assign a certain subordinate name:
When done, you can enable the options below:
Is Passive makes a position unavailable in the list of subordinates? The option is primarily used to avoid deleting levels in use. Otherwise, all linked documents will be lost.
Subordinate creating and submitting the document sets the subordinate level and allows a subordinate to create and submit documents.
Click SAVE to proceed.
...
Click Add to make the Add/Edit Role dialog appear where you can define a role name:
Click Save to confirm the changes and add a new role.
...
Click Add located next to the User group drop-down menu:
Enter a user group name.
Click Save to proceed.
...