Set Up Replicator Service

You can set up the Replicator service by following the steps below:

1. Run Adonis Replicator Manager and switch to Settings in the tree-view left-hand side pane.

2. At the top of the Repl Settings workspace, click Run Settings Wizard. 

3. When the Replicator Settings Wizard appears, navigate to the page where you can define the way of delivering replication events to the Monitoring Service.

 The following options are available:

Open

• Connect to the monitoring server and send events. Select the option to establish a direct TCP connection between the replicator and the monitoring service for sending events.

• Send heartbeat files to the main site. Select the option to primarily send events to the main site (preferable for satellites). After that, Replicator of the main site re-sends the received heartbeat files to the monitoring server through its direct connection.

• Do not send events. Select the option to forbid sending events.

Replicators belonging to one client must use the same login to connect to the monitoring service.

Selecting the Connect to the monitoring server and send events option enables you to configure the following monitoring server settings:

Open

• Server URL. Specify the server name or IP address of your monitoring server.

• Port. Enter the port number that you have defined as the Replicator port when installing the monitoring service.

• User Name. Enter the Repl Login that you defined for the current client when setting up the monitoring service.

• Password. Enter the password that you have defined for the current client when setting up the monitoring service. 

• Transport protocol for monitoring data. Select one of the options:

  • TCP

  • WebSocket

When completed, click Test Connection to make sure the connection has been successfully established.