Skip to end of banner
Go to start of banner

How to display Voyages in the Rotation Planning Module

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 8 Current »

In this article, you will learn what actions to take in case your customers have enabled the Voyages feature on their APM, which can be located within the rotational module.

Introduction

A voyage is a collection of several itineraries. In Adonis, we can add Voyages in the Crew Change module and unite several itineraries under the selected voyage. Create Voyages

This article explains how to display the Voyages information in the Rotation Planning Module.

Contents

Step-by-step guide

To display the Voyages information in the Rotation Planning Module:

  1. Open the Rotation Plan.

  2. Gow to the Options > Rotation Shift Gant.

  3. In the Data Display tab, go to “Gantt Diagram Area” and tick the box or check the “Display Voyage/ Cruise information” and then Click OK to confirm.

  4. Once done, the voyages will be displayed as illustrated below.

See also

Create Voyages

  • No labels