Skip to end of banner
Go to start of banner

How to copy vessel/gangway system structure

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 3 Current »

This article explains how to copy vessel structure from an existing vessel to a new one.

Introduction

Under the Organization Structure, we have an organization tree with companies, vessels, departments, and positions beneath each department.

When you create a new vessel it might have the same/similar structure as the existing vessel: departments, positions.

In this article, we will learn how to copy vessel structure from an existing vessel to a new one.

Contents

Step-by-Step Guide

  1. Go to Setup > Organization Structure.

  2. Select the vessel from which you want to copy the structure (departments/positions).

  3. Click Copy > Structure To and select the new vessel as a target.
    You can do it either from the ribbon menu.

    Or by right-clicking on the selected unit.

  4. The structure is successfully copied.

See also

https://adonishr.atlassian.net/l/cp/f5C8SCJL

https://adonishr.atlassian.net/l/cp/eCL0jnVm

https://adonishr.atlassian.net/l/cp/s7BgS3vW

https://adonishr.atlassian.net/l/cp/Q7dszNXL

  • No labels